Weber 66797 Genesis II & GENESIS 400 Series Flavor Bars
- Fits Weber Genesis II & GENESIS 400 Series Grills (2017-2026)
Description
What Problem This Part Solves
Flavorizer Bars are essential components of the Weber Genesis gas grill cooking system.
Positioned between the cooking grates and burner tubes, these stainless steel bars help distribute heat while protecting the burners from grease, marinades, and food debris.
As cooking drippings contact the heated Flavorizer Bars, some vaporize into flavorful smoke that contributes to the distinctive taste of food cooked on a Weber gas grill.
Over time, repeated exposure to high temperatures, moisture, grease, and cooking residue can cause Flavorizer Bars to deteriorate.
Severely corroded, warped, or burned-through Flavorizer Bars may no longer protect the burner tubes effectively, allowing additional grease and food debris to reach the burners.
The Weber 66797 Stainless Steel Flavorizer Bar Set replaces all seven original bars on compatible Genesis 400 Series grills, helping restore the intended heat distribution, burner protection, and flavor-enhancing performance.
Key Features
-
Genuine Weber OEM replacement parts
-
Manufacturer part number 66797
-
Complete seven-piece stainless steel Flavorizer Bar set
-
Fits most compatible Weber Genesis II 400 Series grills introduced in 2016 and later
-
Fits select Weber Genesis 400 Series grills introduced in 2022 and later
-
Durable stainless steel construction
-
Designed for compatible four-burner Genesis grills
-
Helps distribute heat throughout the cooking surface
-
Vaporizes cooking drippings to enhance grilled flavor
-
Shields burner tubes from grease, marinades, and food debris
-
Replaces corroded, warped, burned-through, or deteriorated Flavorizer Bars
-
Designed for grills with front-mounted control knobs
-
Compatible with select liquid propane and natural gas configurations
-
Direct OEM replacement for compatible factory-installed Flavorizer Bars
Compatibility / Fits Models
Weber 66797 is designed for most Weber Genesis II and Genesis 400 Series four-burner gas grills with front-mounted control knobs.
Compatible Weber Grill Models
Weber Genesis II 400 Series, select configurations:
-
Weber Genesis II E-410
-
Weber Genesis II S-410
-
Weber Genesis II E-435
-
Weber Genesis II S-435
Weber Genesis II LX 400 Series, select configurations:
-
Weber Genesis II LX E-440
-
Weber Genesis II LX S-440
Weber Genesis 400 Series, 2022 and newer compatible configurations:
-
Weber Genesis E-425s
-
Weber Genesis E-435
-
Weber Genesis S-425s
-
Weber Genesis S-435
-
Weber Genesis EX-435
-
Weber Genesis SX-435
-
Weber Genesis SPX-435
Compatibility depends on the exact grill model, production year, and configuration.
Compatible Weber Model Numbers
The following model numbers have been identified in replacement-parts fitment information for Weber 66797.
|
Model Number |
Model Number |
|---|---|
|
36400001 |
36410001 |
|
36800001 |
38400001 |
|
38410001 |
38800001 |
|
62004001 |
62004175 |
|
62006001 |
62006099 |
|
62010001 |
62011001 |
|
62014001 |
62016001 |
|
62020001 |
62030001 |
|
62050001 |
67004001 |
|
67006001 |
67011001 |
|
67014001 |
67016001 |
Additional compatible models may exist. Confirm fitment using your grill's exact model number, serial number, and original Flavorizer Bar dimensions.
Not Intended For
-
Weber Genesis II 200 Series grills
-
Weber Genesis II 300 Series grills
-
Weber Genesis 300 Series grills requiring a five-piece set
-
Weber Genesis II 600 Series grills requiring an eleven-piece set
-
Older Genesis models with incompatible Flavorizer Bar dimensions
-
Weber Spirit gas grills
-
Weber Summit gas grills
Product Specifications
|
Specification |
Details |
|---|---|
|
Brand |
Weber |
|
Part Number |
66797 |
|
Product Type |
Stainless Steel Flavorizer Bar Set |
|
Material |
Stainless Steel |
|
Compatible Series |
Select Genesis II, Genesis II LX, and Genesis 400 Series |
|
Grill Configuration |
Four-Burner |
|
Compatible Generations |
Genesis II 2016+ and Genesis 2022+ |
|
Individual Bar Length |
Approximately 17-1/8 in. |
|
Individual Bar Width |
Approximately 2-1/2 in. |
|
Individual Bar Height |
Approximately 2-1/8 in. |
|
Fuel Compatibility |
Select Liquid Propane and Natural Gas Models |
|
Installation Location |
Above Burner Tubes, Beneath Cooking Grates |
|
Function |
Heat Distribution, Dripping Vaporization, Burner Protection |
|
Replacement Type |
Genuine Weber OEM |
|
Quantity |
7 Flavorizer Bars |
Package Includes
- 7 genuine Weber 66797 stainless steel Flavorizer Bars
This is a complete seven-piece replacement set for compatible Genesis 400 Series grills.
Cooking grates, burner tubes, heat deflectors, and mounting hardware are not included.
Related Weber Replacement Parts
|
Part Number |
Description |
|---|---|
|
66797 |
Stainless Steel Flavorizer Bars – Genesis 400 Series |
|
66795 |
Stainless Steel Flavorizer Bars – Genesis 300 Series |
|
66796 |
Stainless Steel Flavorizer Bars – Genesis II 600 Series |
|
64476 |
Stainless Steel Cooking Grates – Select Genesis 400 Series |
|
64456 |
Porcelain-Enameled Cast Iron Cooking Grates – Select Genesis 400 Series |
|
64558 |
LP Burner Tube Kit – Select Genesis 400 Series |
|
64699 |
Natural Gas Burner Tube Kit – Select Genesis 400 Series |
Verify compatibility before ordering additional replacement components.
Important: Weber 66797 contains seven Flavorizer Bars, even though it is designed for compatible four-burner Genesis grills. The number of Flavorizer Bars does not necessarily equal the number of main burners.
Installation / Use Instructions
1. Prepare the Grill: Turn all burner controls to the OFF position, shut off the gas supply, and allow the grill to cool completely. Remove the cooking grates to access the existing Flavorizer Bars.
2. Replace the Flavorizer Bars: Lift out the original Flavorizer Bars. Inspect the burner tubes and remove accumulated grease or cooking debris as needed. Position the seven Weber 66797 stainless steel Flavorizer Bars onto the designated supports inside the cookbox.
3. Reassemble and Inspect: Confirm that all seven Flavorizer Bars are properly seated and do not interfere with the burner tubes or ignition components. Reinstall the cooking grates and verify that everything is correctly positioned before operating the grill.
Maintenance Recommendations
-
Inspect Flavorizer Bars regularly for corrosion, warping, and burn-through.
-
Remove accumulated cooking debris using an appropriate grill cleaning tool.
-
Clean the bars periodically according to Weber's maintenance recommendations.
-
Avoid excessive grease and food residue buildup.
-
Allow the grill to cool completely before removing Flavorizer Bars.
-
Replace bars that develop holes, severe corrosion, or structural damage.
-
Inspect the burner tubes whenever the Flavorizer Bars are removed.
-
Ensure all seven bars are properly positioned before grilling.
Surface discoloration and minor oxidation are normal results of repeated heating and do not necessarily indicate that replacement is required.
Why Buy From Bar-B-Que.com
-
Trusted grill experts since 1974
-
Genuine replacement parts and premium accessories
-
Fast nationwide shipping
-
Family-owned with real product support
FAQ Section
Does Weber 66797 fit my Genesis grill?
Weber 66797 fits most compatible Weber Genesis II 400 Series grills introduced in 2016 and later, as well as select Genesis 400 Series grills introduced in 2022. These include certain Genesis II E-410, Genesis II LX E-440, Genesis E-435, and Genesis S-435 configurations. Verify your exact grill model and serial number before ordering.
How many Flavorizer Bars are included with Weber 66797?
Weber 66797 includes seven stainless steel Flavorizer Bars, providing a complete replacement set for compatible Genesis 400 Series grills.
What are the dimensions of Weber 66797 Flavorizer Bars?
Each bar measures approximately 17-1/8 inches long, 2-1/2 inches wide, and 2-1/8 inches high. Confirm your existing Flavorizer Bar dimensions before purchasing.
What is the difference between Weber 66795 and Weber 66797?
Weber 66795 contains five stainless steel Flavorizer Bars for compatible Genesis 300 Series grills. Weber 66797 contains seven stainless steel Flavorizer Bars for compatible Genesis 400 Series grills. These sets are designed for different grill configurations and should not be assumed interchangeable.
When should I replace my Weber Genesis Flavorizer Bars?
Replace Flavorizer Bars when they develop holes, severe corrosion, significant warping, or structural damage. Normal discoloration and minor surface oxidation do not necessarily mean replacement is required.