Great quality
Product was exactly as described. Shipment was fast!
Flavorizer Bars are essential components of the Weber Genesis gas grill cooking system.
Located between the cooking grates and burner tubes, these stainless steel bars help distribute heat while protecting the burners from grease, marinades, and food debris.
When cooking drippings contact the heated Flavorizer Bars, a portion vaporizes into flavorful smoke that contributes to the distinctive taste of food cooked on a Weber gas grill.
Over time, repeated exposure to high temperatures, moisture, grease, and cooking residue can cause the original Flavorizer Bars to deteriorate.
Severely corroded, warped, or burned-through bars may no longer shield the burner tubes effectively. This can allow more grease and debris to reach the burners and interfere with normal grilling performance.
The Weber 66795 Stainless Steel Flavorizer Bar Set replaces all five original bars on compatible Genesis grills, helping restore the intended heat distribution, burner protection, and flavor-enhancing performance.
Genuine Weber OEM replacement parts
Manufacturer part number 66795
Complete five-piece Flavorizer Bar set
Durable stainless steel construction
Fits most compatible Weber Genesis II and Genesis II LX 300 Series grills
Fits select Weber Genesis 300 Series grills introduced in 2022
Designed for grills with front-mounted control knobs
Helps distribute heat evenly throughout the cookbox
Vaporizes cooking drippings to enhance grilled flavor
Shields burner tubes from grease, marinades, and food debris
Replaces corroded, warped, burned-through, or deteriorated Flavorizer Bars
Direct replacement for compatible factory-installed Flavorizer Bars
Suitable for compatible liquid propane and natural gas grills
Easy to remove for routine cleaning and replacement
Weber 66795 is designed for most compatible Genesis II and Genesis II LX 300 Series gas grills, as well as select Genesis 300 Series models introduced in 2022.
Genesis II 300 Series (2017–2022), select configurations:
Weber Genesis II E-310
Weber Genesis II E-315
Weber Genesis II E-330
Weber Genesis II E-335
Weber Genesis II S-310
Weber Genesis II S-335
Genesis II LX 300 Series, select configurations:
Weber Genesis II LX E-340
Weber Genesis II LX S-340
Genesis 300 Series (2022–2024), select configurations:
Weber Genesis E-325s
Weber Genesis E-335
Weber Genesis S-325s
Weber Genesis S-335
Weber Genesis EX-325s
Weber Genesis EX-335
Weber Genesis SX-325s
Weber Genesis SX-335
Additional compatible Genesis 300 Series configurations may use this set.
Weber identifies part number 66795 for Genesis 300 Series grills manufactured from 2022 through 2024, as well as select 2026 Genesis 300 Series configurations.
Some 2025 Genesis 300 Series models use a different Flavorizer Bar part number. Always verify compatibility using the grill's model number, serial number, and Weber replacement-parts diagram.
Weber Genesis II 200 Series grills
Weber Genesis II 400 Series grills requiring a different Flavorizer Bar set
Weber Genesis 400 Series grills
Older Genesis 300 Series models from 2011–2016 requiring different-length bars
Weber Spirit gas grills
Weber Summit gas grills
Genesis configurations whose parts diagrams specify another Flavorizer Bar set
|
Specification |
Details |
|---|---|
|
Brand |
Weber |
|
Part Number |
66795 |
|
Product Type |
Stainless Steel Flavorizer Bar Set |
|
Material |
Stainless Steel |
|
Compatible Series |
Select Genesis II, Genesis II LX, and Genesis 300 Series |
|
Compatible Generations |
Genesis II 2017–2022; Select Genesis 2022+ |
|
Grill Configuration |
300 Series |
|
Control Configuration |
Front-Mounted Controls |
|
Individual Bar Length |
Approximately 17-1/8 in. |
|
Individual Bar Width |
Approximately 3 in. |
|
Individual Bar Height |
Approximately 2-1/8 in. |
|
Fuel Compatibility |
Liquid Propane and Natural Gas |
|
Installation Location |
Above Burner Tubes, Beneath Cooking Grates |
|
Function |
Heat Distribution, Flavor Enhancement, Burner Protection |
|
Replacement Type |
Genuine Weber OEM |
|
Quantity |
5 Flavorizer Bars |
- 5 genuine Weber 66795 stainless steel Flavorizer Bars
This is a complete five-piece replacement set for compatible Genesis 300 Series grills. Cooking grates, burner tubes, heat deflectors, and mounting hardware are not included.
|
Part Number |
Description |
|---|---|
|
66795 |
Stainless Steel Flavorizer Bars – Genesis 300 Series |
|
66032 |
Porcelain-Enameled Flavorizer Bars – Select Genesis II 300 Series |
|
66797 |
Stainless Steel Flavorizer Bars – Genesis 400 Series |
|
66794 |
Flavorizer Bars – Genesis II 200 Series |
|
66685 |
Heat Deflectors – Select Genesis II and Genesis 300 Series |
|
6415 |
Disposable Aluminum Drip Pans |
Verify compatibility before ordering additional replacement components.
Important: Weber 66795 is not interchangeable with every Genesis 300 Series Flavorizer Bar set. The older 2011–2016 Genesis generation uses a different design and length. Measure your existing bars and confirm your grill's serial number before ordering.
1. Prepare the Grill: Turn all burner controls to the OFF position, shut off the gas supply, and allow the grill to cool completely. Remove the cooking grates to access the existing Flavorizer Bars.
2. Replace the Flavorizer Bars: Lift out the original Flavorizer Bars. Inspect the burner tubes and remove accumulated grease or cooking debris as needed. Position the five Weber 66795 stainless steel Flavorizer Bars onto the designated supports above the burner tubes.
3. Reassemble and Inspect: Confirm that all five Flavorizer Bars are properly seated and do not interfere with the burners or ignition components. Reinstall the cooking grates and verify that all components are correctly positioned before operating the grill.
Inspect Flavorizer Bars regularly for corrosion, warping, and burn-through.
Remove accumulated cooking debris using an appropriate grill cleaning tool.
Clean the bars periodically according to Weber's maintenance instructions.
Avoid excessive grease and food residue buildup.
Allow the grill to cool completely before removing Flavorizer Bars.
Replace bars that develop holes, severe corrosion, or structural damage.
Inspect burner tubes whenever the Flavorizer Bars are removed.
Ensure all five bars are properly positioned before grilling.
Surface discoloration and minor oxidation are normal results of repeated heating and do not necessarily indicate that replacement is required.
Trusted grill experts since 1974
Genuine replacement parts and premium accessories
Fast nationwide shipping
Family-owned with real product support
Weber 66795 fits most compatible Genesis II and Genesis II LX 300 Series gas grills, along with select Genesis 300 Series models introduced in 2022. These include certain Genesis II E-310, E-335, Genesis E-325s, E-335, and S-335 configurations. Verify your exact grill model and serial number before ordering.
Weber 66795 includes five stainless steel Flavorizer Bars, providing a complete replacement set for compatible Genesis 300 Series gas grills.
Each Flavorizer Bar measures approximately 17-1/8 inches long, 3 inches wide, and 2-1/8 inches high. Confirm the dimensions of your existing bars before purchasing.
Weber 66795 is a five-piece stainless steel Flavorizer Bar set for select Genesis 300 Series grills. Weber 66797 is designed for compatible Genesis 400 Series grills. These sets are intended for different grill configurations and should not be assumed interchangeable.
Replace Flavorizer Bars when they develop holes, severe corrosion, significant warping, or structural damage. Normal discoloration and minor surface oxidation do not necessarily mean replacement is required.
Product was exactly as described. Shipment was fast!