Napoleon N750-0079 Built-In PRO 825 Control Box Wire Harness

What Problem This Part Solves

A damaged or failed control box wire harness can interrupt electrical communication or power between the transformer and control box. Depending on the failure, this can contribute to problems with the grill’s powered electrical features.

Common reasons for replacement include:

• Cut or damaged wiring
• Burned or overheated wires
• Corroded electrical connections
• Broken or damaged connectors
• Wiring damage during previous repairs
• Loss of electrical continuity between the transformer and control box

Replacing a confirmed faulty harness with the Napoleon N750-0079 restores the original factory wiring connection between these components.

Key Features

• Genuine Napoleon OEM replacement part
• Napoleon part number N750-0079
• Factory control box wire harness
• Connects the power transformer/control box system
• Designed for select PRO825-3 generation grills
• Factory-style electrical connectors for proper installation
• Replaces a damaged, cut, burned, or malfunctioning original harness
• Used on both freestanding and built-in Prestige PRO 825 configurations

Napoleon’s official parts listings show the N750-0079 alongside the PRO 825 electrical panel, transformer, ignition components, and related wiring.

Compatibility / Fits Models

Fits select Napoleon Prestige PRO 825 models, including:

Napoleon Built-In Prestige PRO 825

• BIPRO825-3
• BIPRO825RBIPSS-3
• Built-In Prestige PRO 825 RBI

Napoleon Prestige PRO 825

• PRO825-3
• PRO825RSBIPSS-3
• Prestige PRO 825 RSBI

Parts documentation specifically identifies N750-0079 for BIPRO825-3, BIPRO825RBIPSS-3, PRO825-3, and PRO825RSBIPSS-3 configurations.

Important: Napoleon has produced several generations of the Prestige PRO 825. Confirm your complete model and serial number before ordering to ensure N750-0079 is correct for your grill.

Installation / Use Instructions

1. Disconnect the grill from electrical power and shut off the gas supply before beginning service.
2. Locate the existing control box wiring, document the original wire routing and connector locations, and carefully disconnect the old harness.
3. Install the Napoleon N750-0079 using the same factory routing and connection points, keeping wiring safely away from hot surfaces and moving components.

Because this part is part of the grill’s electrical system, verify all connections before reconnecting power.

Why Buy From Bar-B-Que.com

• Trusted grill experts since 1974
• Genuine replacement parts and premium accessories
• Fast nationwide shipping
• Family-owned with real product support

FAQ Section

Does this fit my grill?
The Napoleon N750-0079 fits select Prestige PRO 825 and Built-In Prestige PRO 825 grills, including BIPRO825-3, BIPRO825RBIPSS-3, PRO825-3, and PRO825RSBIPSS-3 configurations.

What is this part made of?
The N750-0079 is an OEM electrical wire harness consisting of insulated wiring and factory-style electrical connectors designed for the PRO 825 control box and power system.

How long should this part last?
The harness is designed for long-term use. Lifespan depends on heat exposure, moisture, corrosion, physical damage, electrical conditions, and proper wire routing. Replace the harness if the insulation, wiring, or connectors become damaged.

How do I install it?
Disconnect electrical power and shut off the gas supply. Carefully document the existing harness routing before disconnecting it, then connect the N750-0079 to the same factory connection points and secure the wiring away from heat-producing components.

Why choose this replacement part over others?
The Napoleon N750-0079 is the genuine OEM control box wire harness specified in Napoleon’s official PRO 825 parts documentation. Using the correct harness provides the proper connector configuration, wire routing, and compatibility with the grill’s factory electrical system.