Napoleon N240-0034 Built-In 700 & PRO665 Rear Burner Electrode

What Problem This Part Solves

A cracked, corroded, misaligned, or failed rear burner electrode can prevent the rear rotisserie burner from sparking and lighting properly. Replacing it with the Napoleon N240-0034 restores the ignition spark needed for reliable rear burner operation.

Key Features

• Genuine Napoleon OEM replacement part
• Napoleon part number N240-0034
• Rear burner ignition electrode
• Restores spark ignition to the rear rotisserie burner
• Designed for select Built-In 700 Series and Prestige PRO grills

Compatibility / Fits Models

Fits select Napoleon grills, including:

Built-In 700 Series

• Napoleon BIG32 Series
• Napoleon BIG32RB Series
• Napoleon BIG38 Series
• Napoleon BIG38RB Series
• Napoleon BIG44 Series
• Napoleon BIG44RB Series

Napoleon’s official parts listings show N240-0034 as the rear burner electrode on BIG32, BIG38, and BIG44 Built-In 700 Series grills. The BIG44 also uses an additional left-side rear burner electrode, part N240-0044.

Prestige PRO Series

• Napoleon Prestige PRO 665
• Napoleon PRO665 Series

Confirm your complete grill model number before ordering, as Napoleon has produced multiple revisions within these grill families.

Installation / Use Instructions

1. Shut off the gas supply and disconnect power from the grill before installation.
2. Remove the old rear burner electrode and connect the replacement N240-0034 to the existing ignition wire.
3. Secure the electrode in the original mounting position and verify proper spark alignment before operating the grill.

Why Buy From Bar-B-Que.com

• Trusted grill experts since 1974
• Genuine replacement parts and premium accessories
• Fast nationwide shipping
• Family-owned with real product support

FAQ Section

Does this fit my grill?
The Napoleon N240-0034 fits select Built-In 700 Series BIG32, BIG38, and BIG44 grills as well as compatible Prestige PRO 665 models. Napoleon officially lists the N240-0034 as the rear burner electrode on multiple BIG32, BIG38, and BIG44 configurations.

What is this part made of?
The N240-0034 is an OEM ignition electrode assembly designed to withstand the heat and operating conditions around the grill’s rear burner.

How long should this part last?
Lifespan depends on heat exposure, moisture, grease buildup, cleaning practices, and grilling frequency. Replace the electrode if the ceramic insulator becomes cracked, the tip becomes badly corroded, or the burner no longer receives a consistent ignition spark.

How do I install it?
Disconnect the grill from its fuel and power sources, remove the existing electrode, attach the ignition wire to the N240-0034, and secure it in the original mounting location.

Why choose this replacement part over others?
The Napoleon N240-0034 is a genuine OEM electrode designed to maintain the proper fit, spark location, and ignition performance of compatible Napoleon rear burner systems.