Kamado Joe 9926200026 Pellet Joe Circuit Board with Housing

What Problem This Part Solves

The PCB functions as a central electronic component in the Pellet Joe’s control system. A failed or damaged circuit board can interfere with the grill’s ability to operate and electronically manage its cooking functions.

Depending on the nature of the failure, symptoms that may indicate a control-board or related electrical problem can include:

• Grill will not power up correctly
• Control system behaves erratically
• Temperature controls do not respond correctly
• Grill has difficulty controlling cooking temperature
• Display or controller functions malfunction
• Electrical components fail to communicate properly
• Visible damage, corrosion, or overheating on the original circuit board

Because several electrical components work together in the Pellet Joe, the PCB should be properly diagnosed before replacement. Other related components, such as the power supply or control dial, can cause similar symptoms.

Key Features

• Genuine Kamado Joe OEM replacement part
• Kamado Joe part number 9926200026
• PCB circuit board with protective housing
• Designed specifically for the Pellet Joe
• Part of the grill’s electronic control system
• Interfaces with the Pellet Joe’s temperature-control components
• Factory replacement for a failed or damaged control board
• Housing is included with the PCB
• Designed for direct compatibility with the original Pellet Joe electronics

The Pellet Joe uses electronic thermostatic control to maintain cooking temperatures from 150°F to 600°F, with temperature adjustment available through the grill’s control knob or Kamado Joe app.

Compatibility / Fits Models

Fits:

Kamado Joe Pellet Joe

• KJ15260020

Kamado Joe’s official replacement-parts listing specifically identifies KJ15260020 as the compatible model for part 9926200026.

Important: This part should not be assumed to fit other Kamado Joe electronically controlled grills such as the Konnected Joe. It is specifically listed by Kamado Joe for the Pellet Joe KJ15260020.

Confirm your complete model number before ordering.

Installation / Use Instructions

1. Unplug the Pellet Joe from electrical power and allow the grill to cool completely.
2. Access the existing PCB assembly, photograph or document all wiring connections, and carefully disconnect the original circuit board and housing.
3. Install the Kamado Joe 9926200026 assembly in the factory position, reconnect each electrical connection to its proper location, and verify operation before returning the grill to service.

Do not service the circuit board while the Pellet Joe is connected to electrical power.

Why Buy From Bar-B-Que.com

• Trusted grill experts since 1974
• Genuine replacement parts and premium accessories
• Fast nationwide shipping
• Family-owned with real product support

FAQ Section

Does this fit my grill?
The Kamado Joe 9926200026 is specifically listed by Kamado Joe for the Pellet Joe model KJ15260020.

Does the housing come with the circuit board?
Yes. Kamado Joe sells 9926200026 as a PCB with Housing Kit, so the housing is included with the circuit board assembly.

What does the circuit board control?
The PCB is part of the Pellet Joe’s electronic operating and temperature-control system. The Pellet Joe is thermostatically controlled and can maintain selected temperatures from 150°F to 600°F.

How do I install it?
Disconnect the grill from power, access the original PCB, document the existing wire connections, remove the old board and housing, and install the 9926200026 assembly using the same factory connections and mounting configuration.

Why choose this replacement part over others?
The Kamado Joe 9926200026 is the genuine OEM PCB and housing kit specifically identified by Kamado Joe for the Pellet Joe KJ15260020. Using the correct OEM assembly helps ensure proper physical fit and compatibility with the Pellet Joe’s original electronic system.