AOG 24-B-17A Rotisserie Back Burner

What Problem This Part Solves

The rotisserie back burner operates in a high-temperature environment and can eventually deteriorate from repeated heating, grease exposure, moisture, and normal use.

A worn back burner can result in:

• Weak rotisserie heat
• Uneven heat distribution
• Difficulty maintaining rotisserie cooking temperatures
• Poor browning of meats and poultry
• Burner deterioration or physical damage
• Problems lighting or maintaining the rear burner flame

Replacing the original burner with AOG 24-B-17A restores the dedicated rear heat source used for rotisserie cooking on compatible 24-inch AOG grills.

Key Features

• Genuine American Outdoor Grill replacement part
• AOG part number 24-B-17A
• Infrared-style rear rotisserie burner
• Designed for 24-inch AOG grills
• Used with compatible L-Series and T-Series models
• Provides concentrated heat from behind the rotisserie spit
• Helps produce even browning while rotisserie cooking
• Can also provide supplemental heat beneath food placed on the warming rack
• Replacement for a deteriorated, cracked, damaged, or poorly performing original back burner
• Approximately 12 inches long according to replacement-parts references
• Constructed with stainless steel and other high-temperature burner components

AOG's current grill literature identifies a built-in infrared backburner and rotisserie system as a standard feature on applicable grills equipped with the backburner option.

Compatibility / Fits Models

AOG 24-B-17A is specifically listed for compatible 24-inch American Outdoor Grill models, including applicable:

• AOG 24-inch L-Series grills
• AOG 24-inch T-Series grills
• 24-inch built-in configurations
• 24-inch portable/cart configurations equipped with a backburner
• Current-generation 24-inch grills whose factory parts diagram specifies 24-B-17A

The current factory replacement-parts table is particularly useful here:

Fits most grills within this series—confirm model number before ordering.

Important: 24-B-17A vs. 24-B-17

These parts should not be confused.

• 24-B-17A – Newer/current-style infrared backburner for compatible 24-inch L & T Series grills
• 24-B-17 – Earlier infrared backburner used on pre-2015 AOG grills

AOG's replacement-parts seller identifies 24-B-17A with newer 24-inch grills, while 24-B-17 is specifically identified for pre-2015 applications.

If you are repairing an older AOG grill, verify the original burner part number before ordering.

Installation / Use Instructions

1. Turn off the gas supply, disconnect electrical power where applicable, and allow the grill to cool completely.
2. Remove the necessary warming rack and rear-burner components to access and remove the existing back burner.
3. Install the new 24-B-17A in the factory position, reconnect the applicable gas and ignition components, and reassemble the grill.

Important: Because this is a gas burner, any gas connection disturbed during installation should be checked for leaks with an approved leak-detection solution before operating the grill. Never test for gas leaks with an open flame.

Why Buy From Bar-B-Que.com

• Trusted grill experts since 1974
• Genuine replacement parts and premium accessories
• Fast nationwide shipping
• Family-owned with real product support

FAQ Section

Does AOG 24-B-17A fit my grill?
AOG's current factory parts documentation specifies 24-B-17A for its 24-inch grills. The 30- and 36-inch models use 30-B-17A instead.

Is this a main burner?
No. The 24-B-17A is the rear/backburner used for rotisserie cooking. The factory main burner used in current 24-inch AOG grills is part number 24-B-06.

Is this an infrared burner?
Yes. AOG replacement-parts sources identify 24-B-17A as an infrared back burner, designed to provide concentrated rear heat for rotisserie cooking.

Does 24-B-17A replace 24-B-17 on older AOG grills?
Do not assume they are interchangeable. 24-B-17 is specifically listed for older pre-2015 grills, while 24-B-17A is associated with newer/current applications. Compare your model, production date, and original burner part number before ordering.

Does this burner fit 30-inch and 36-inch AOG grills?
No. Current AOG factory documentation specifies 24-B-17A for the 24-inch grill and 30-B-17A for both the 30- and 36-inch grills.