AOG 24-B-51T T-Series Burner Valve with Igniter Assembly

What Problem This Part Solves

A worn burner valve or ignition assembly can cause problems controlling or lighting the grill's main burners.

Replacing the original assembly with AOG 24-B-51T can correct issues such as:

• Burner control valve that is difficult to turn
• Valve that sticks during adjustment
• Poor or inconsistent flame control
• Gas leakage from a damaged valve
• Igniter that no longer sparks reliably
• Damaged igniter electrode or wire
• Burner that is difficult to ignite
• Failed integrated valve/igniter mechanism

Because the valve and ignition mechanism are combined, replacing 24-B-51T can restore both burner control and ignition operation when the original assembly has failed.

Key Features

• Genuine American Outdoor Grill replacement part
• AOG part number 24-B-51T
• Main burner gas control valve and igniter combined into one assembly
• Designed for compatible AOG T-Series grills
• Used on 24", 30", and 36" AOG grills
• Controls gas flow and flame level for an individual main burner
• Integrated piezo-style ignition system
• Aluminum valve body construction
• Includes mounted igniter electrode and wire
• Approximately 2-7/8" igniter flash tube
• Sold individually
• Gas orifice is NOT included
• Replacement for a sticking, leaking, damaged, or malfunctioning burner valve/igniter assembly

Compatibility / Fits Models

AOG's current factory parts documentation lists 24-B-51T for its 24", 30", and 36" grill platforms. The factory table specifies the following quantities:

• 24" AOG Grill – 2 required
• 30" AOG Grill – 3 required
• 36" AOG Grill – 3 required

Current AOG documentation actually shows 24-B-51T in the main-burner-valve position for both L-Series and T-Series, while the replacement-parts catalog specifically describes the component as “Valve with Igniter Assembly (‘T’ Series).”

Replacement-parts references further identify the integrated valve configuration with T-Series models from approximately 2014 and newer.

Fits most grills within this series—confirm model number before ordering.

Important: Orifice Is Not Included

The 24-B-51T does not include the gas orifice. The existing correct orifice must be transferred from the original valve or the proper replacement orifice must be obtained for the grill's fuel configuration.

This is especially important because the orifice determines proper gas flow for natural gas or propane operation. Never install or operate the valve without the correct orifice for the grill and fuel type.

24-B-51T vs. 24-B-20

These parts serve similar purposes but are intended for different AOG configurations:

• 24-B-51T – Main burner valve with integrated igniter assembly, associated primarily with T-Series
• 24-B-20 – Main burner valve only, listed by AOG for L-Series and pre-2015 applications

AOG's replacement-parts catalog specifically distinguishes these two components.

Installation / Use Instructions

1. Shut off the gas supply completely and allow the grill to cool before beginning service.
2. Remove the control panel as required, disconnect the existing valve/igniter assembly, and transfer the correct original gas orifice if it is being reused.
3. Install the new 24-B-51T, reconnect the ignition components, reinstall the control panel, and thoroughly leak-test all disturbed gas connections before lighting the grill.

Important: The orifice is not included. Verify that the correct natural gas or propane orifice is installed before operating the grill. Never check for gas leaks with an open flame.

Why Buy From Bar-B-Que.com

• Trusted grill experts since 1974
• Genuine replacement parts and premium accessories
• Fast nationwide shipping
• Family-owned with real product support

FAQ Section

Does AOG 24-B-51T fit my grill?
AOG factory documentation lists 24-B-51T as the main burner valve with igniter assembly used on its 24", 30", and 36" grill platforms. Replacement-parts references identify it primarily with T-Series grills, including T-Series models from approximately 2014 and newer.

Does 24-B-51T include the igniter?
Yes. It combines the main burner gas valve and integrated igniter assembly. Replacement-parts documentation describes an integrated piezo-style igniter, flash tube, electrode, and wire.

Does the gas orifice come with 24-B-51T?
No. The orifice is not included. The proper existing orifice can be transferred if appropriate, or the correct replacement must be obtained for your grill and fuel type.

How many 24-B-51T valves does my AOG grill use?
AOG's current factory documentation specifies 2 for 24" grills, 3 for 30" grills, and 3 for 36" grills. The valve itself is sold individually.

Is 24-B-51T the same as AOG 24-B-20?
No. AOG identifies 24-B-51T as the valve with igniter assembly for T-Series applications, while 24-B-20 is the valve-only component used with L-Series and pre-2015 applications.