Share Print Page Recently Viewed

You have not viewed any products recently.

 
Hose, Natural (and LP) Gas 10' 1/2" Hose With Quick Dis/Connector 93541 #42902 Enlarge View
Hose, Natural (and LP) Gas 10' 1/2" Hose With Quick Dis/Connector 93541 #42902

Alternative Views

  • There are no alternate images available for this product.
 

Hose, Natural (and LP) Gas 10' 1/2" Hose With Quick Dis/Connector 93541 #42902

item# 93541

Hose, Natural (and LP) Gas 10' 1/2" Hose With Quick Dis/Connector for larger BTU grills. 93541 #42902

$99.99
 
 
 
10' flexible hose 1/2" inside diameter (ID) for cart mounted gas grills that require connection to a rigid, natural gas line or to an LP tank. (The hose has imprinted on it "DG-3874 FOR NATURAL AND LP GAS-MAX PRESS. 5 PSI (34,45Kpa) ANSI Z21.54 (CGA 8.4)".) Includes brass quick dis-connector / connector. The 1/2" ID hose allows more gas to flow to meet the requirements of larger grills. This hose is actually for a Weber® Summit® S-670 (6 main burners + rotisserie burner + side burner + wood chip smoker burner + sear burner => 100,000 BTU/hour). The Weber® hose says M.B. STURGIS ST. LOUIS MO on it so I guess it's USA made. The quick-connect (dis-connect) brass adapter will screw directly on to a 1/2" male iron pipe (MIP) stub which is common for houses in the US. Gas thread tape or pipe thread dope is recommended as is a shut-off valve before the adapter. The other end of the hose has a female 1/2" flare coupling piece which should screw directly to the grill's 1/2" male flare fitting (do not use thread tape or dope on the flare fitting). If your house has a 3/4" pipe for the natural gas you will need to reduce 3/4" to a 1/2" MIP thread with a reducing coupling and nipple. Do not use the 10ft hose without the appropriate LP regulator! Improper use can cause explosive and fire hazards as well as asphyxiation! 93541 is Weber® #42902. (The photo shows a 3/8" hose. The 1/2" hose looks the same only larger. (You wouldn't know unless they're side by side.))